Diamond Blades

Abrasive Wheels

Safety Information

- Diamond Saw Blades

  for cured & green concrete, asphalt, marble, granite, etc.

- Abrasive Cut-Off Saw Wheels and Grinding Wheels

  for metal cutting & grinding

Speed^™  Premium Quality General Purpose Diamond Blades 

More sizes and models will be available soon! Call for details

Speed^™  Abrasive Cut-Off Wheels and Grinding Wheels  

More sizes and models will be available soon! Call for details

14"

Metal Cutting, 14" x 1/8" x 1", 25 pcs/box

7"

Metal Cutting, 7" x 1/8" x 5/8", 140 pcs/box  

Metal Cutting, 7" x 1/8" x 5/8", 100 pcs/box

4 ½"

Metal Cutting, 4 ½" x 1/16" x 7/8", 500 pcs/box

Metal Cutting, 4 ½" x 3/32" x 7/8", 200 pcs/box

(Depressed Center)

7"

Metal Grinding, 7" x 1/4" x 7/8", 60 pcs/box

(Depressed Center)

4 ½"

Metal Grinding, 4 ½" x 1/4" x 7/8", 120 pcs/box

(Depressed Center)

IMPORTANT SAFETY INFORMATION

Cutting and Grinding Wheel work under high speed rotation.

Improper operation may cause blade or wheel breakage or serious injury.

DO:

• Always handle and store wheels in a careful manner.

• Visually inspect all wheels before mounting for possible damage.

• Make sure operating speed of machine. Do not exceed speed marked on wheel.

• Check mounting flanges for equal size, relieved as required and correct diameter.

• Use mounting blotters as required by ANSI standards.

• Use safety guard that covers a minimum half of wheel.

• Allow newly mounted wheel to run at operating speed for at least one minute.

• Wear safety glasses, gloves and necessary protection equipments.

• Turn off coolant before stopping cutting to avoid creating an out-of-balance wheel.

• Follow common sense safety considerations.

DO NOT:

• Do not use a wheel that has been dropped or appears to have been abused.

• Do not force a wheel onto machine or alter size of the mounting hole.

• Do not exceed maximum operating speed.

• Do not use mounting flange on which bearing surface is not clean, flat, smooth.

• Do not tighten mounting nut excessively.

• Do not use on any machine that is not properly designed for application of the wheel.

• Do not jam working object into wheel.

• Do not stand directly in front of running machine.

• Do not use on material which is not designed for.

• Do not touch a wheel just been used since it might be very hot.